Home >JH Products>Development Boards>Breakout Boards>

Browse history

Description

1. Operating voltage: no need to connect to any power supply,
two-wire system
2. The two-wire voltage meter design, the wiring is simple, easy to
install
3. When there is a slight error, you can calibrate it through the circuit
board, "fine-tuning" potentiometer for calibration
Specifications:
1. Measuring range: AC70V-500V
2. Power supply range
No additional power supply needed, direct use of the measured voltage
as a power supply, range: AC70V-500V
3. Maximum input
AC500V. Note: Input voltage higher than 500V may be permanently damaged!
4. Allowable error: ± 1%;
5. Input impedance> 1M ohms
Refresh speed: About 300mS / time
7. Display mode
Three-digit " 0.56 " LED digital tube
8. Display the color: Green/Blue/Red
9. Lead length: about: 20 cm / 7.87 in
10. Outside dimensions: about: 4.8 x 2.9 x 2.2 cm / 1.89 x 1.17 x 0.87 in
Hole Size: about 4.6 x 2.7 cm / 1.81 x 1.06 in
11. Net weight: about 18g
12. Operating temperature: -20 ° C to 65 ° C

Package Type:
All goods will pack into cartons and wrapped full of waterproof tape before shipment .

We can accept customized package to meet different requirements :
1.Every item will separately pack into plastic bag ,component, module can be packed in anti static bag .
2.Some fragile products such as the display screen can be packed in bubble bag .
3.Some large machines can be packed in wooden cases.
4.We can label JH code or client's code on package so that customers can check easily after receive goods.

AC 70-500V 0.56" LED 2 Wires Digital Voltmeter Tester

SKU : YXB446 Brand : JH Sourcing

Price : $ 1.01~1.21

100 +: $1.01~1.21500 +: $1.01~1.211000 +: $1.01~1.21

Colour：

Quantity :

- +

ADD TO CART