Browse history
Description
The nRF24L01+module implements 2.4G wireless module SPI interface to TTL string, and then converts it to USB interface communication through USB to TTL serial port chip. That is, interface 2.4G wireless module=2.4G wireless module SPI interface+STM32 microcontroller+USB to serial port chip CH340. Customers do not need to have a detailed understanding of the communication protocol of the 2.4G wireless module. They only need to know how to use the serial port to operate it. They can configure wireless communication parameters through a few at commands from the serial port assistant. The system parameter settings are not lost when power is off, and after power is on, it remains in the last state. The built-in watchdog anti crash program can operate stably in harsh industrial control environments. Shorten the research and development cycle to facilitate rapid verification and testing of the wireless communication system designed by oneself. Using RFX2401C RF front-end amplification chip, wireless signals can be amplified to a maximum of 22dBm, effectively increasing the distance of signal communication
Product Features:
High gain built-in ceramic antenna/external SMA antenna
High power RF front-end amplification
Transmitting and receiving sensitivity, high power
Long transmission distance, able to pass through walls
Transparent transmission of user wireless data
AT+setting command, parameter command, easy to set
Baud rate, communication channel, rate, verification method, and rich parameter settings
Parameter settings are not lost when power is lost, no need to set each time
Package Type:
All goods will pack into cartons and wrapped full of waterproof tape before shipment.
We can accept customized package to meet different requirements:
1.Every item will separately pack into plastic bag,component,module can be packed in anti static bag.
2.Some fragile products such as the display screen can be packed in bubble bag.
3.Some large machines can be packed in wooden cases.
4.We can label JH code or client's code on package so that customers can check easily after receive goods.
USB/TTL to nRF24L01 Module
SKU : YXS1612 Brand :
Style:
USB interface
TTL interface built-in antenna
TTL interface external antenna
You May Also Like

MCU-2232 FT2232HL USB To UART/FIFO/SPI/I2C/JTAG/RS232 Module
$12.23

USB to TTL CH340G Connector Module
$0.49

CH340G USB to TTL Converter Module
$0.85

8/16/32/64/128 Metal USB Drive
$15.19

FT232RL USB to TTL Serial Convert Module
$1.13

RS232 to TTL Serial Port Module
$1.33

ZK-U/H485 USB to RS485 Converter
$2.73

AVRISP / USBasp / STK500 10PIN to 6PIN Conversion Stand
$0.17

CH341A USB to UART IIC SPI TTL ISP EPP Parallel Converter
$1.40

CH340 Three-In-One Serial Port Conversion Module
$4.15

USB to RS485 Converter Adapter Support Win7 Win8
$0.47

USB-TTL/CAN Serial Communication Module
$3.99

CP2102 CH9102 USB to Serial Module
$0.96

CP2102 USB to UART Serial Port Module
$2.19

CH340G USB To TTL Module
$0.97
.jpg)
MCU2012 CP2102 USB to TTL Connector Module
$0.96

FT232RL USB to TTL Serial Adapter Module
$0.61

FT232RL USB to TTL Converter
$8.53

ADUM3160 USB to USB Isolation Module
$4.05

CH340 USB to ESP8266 ESP-01 ESP-01S Wifi Adapter Board
$1.08