Weight: 1g
Size: 12mm*18mm
NRF24L01 is a single-chip transceiver chip that operates in the 2.4-2.5GHz world wide ISM frequency band. The wireless transceiver includes: frequency generator, enhanced, SchockBurstTM, mode controller, power amplifier, crystal amplifier, modulator, demodulator, output power channel selection, and protocol settings. The current consumption can be set to extremely low through the SPI interface. When operating in transmission mode with a transmission power of 6dBm, the current consumption is 9.0mA. The acceptance mode is 12.3mA, and the current consumption mode is lower in power off mode and standby mode.
1. Low operating voltage: 1.9-3.6V Low voltage operation.
2. High speed: 2Mbps. Due to the short air transmission time, collision phenomena in wireless transmission are greatly reduced (software sets an air transmission rate of 1Mbps or 2Mbps).
3. Multi frequency point: 125 frequency points, meeting the needs of multi-point communication and frequency hopping communication.
4. Ultra compact: Built in 2.4GHz antenna, compact size, 15x29mm (including antenna)
5. Low power consumption: When working in response mode communication, fast air transmission and startup time greatly reduce current consumption.
6. Low application cost: NRF24L01 integrates all high-speed signal processing components related to the RF protocol, such as automatic retransmission of lost data packets and automatic generation of response signals. The SPI interface of NRF24L01 can be connected using the hardware SPI port of the microcontroller or simulated using the microcontroller I/O port. The internal FIFO can interface with various high and low speed microprocessors, making it easy to use low-cost microcontrollers.
7. Easy to develop: Due to the complete integration of the link layer on the module, it is very easy to develop. Automatic retransmission function, automatic detection and retransmission of lost data packets. The retransmission time and number can be controlled by software to automatically store data packets that have not received a response signal. The automatic response function automatically sends a response signal after receiving valid data, without the need for separate programming of carrier detection. Fixed frequency detection has built-in hardware CRC error detection and point-to-point communication address control. The data packet transmission error counter and carrier detection function can be used for frequency hopping settings. Six receiving channel addresses can be set simultaneously, and the standard pin Dip2.54mm spacing interface of the receiving channel can be selectively opened for embedded applications.

Package Type:
All goods will pack into cartons and wrapped full of waterproof tape before shipment.

We can accept customized package to meet different requirements:
1.Every item will separately pack into plastic bag,component,module can be packed in anti static bag.
2.Some fragile products such as the display screen can be packed in bubble bag.
3.Some large machines can be packed in wooden cases.
4.We can label JH code or client's code on package so that customers can check easily after receive goods.